LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Frontier SL, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (VQ40DE) >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    CONTINUITY REFERENCE CHART

    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist

    If NG, adjust ASCD clutch switch installation, refer to "ON-VEHICLE INSPECTION AND ADJUSTMENT ", and perform step  3 again.

    Fig 1: Checking Harness Continuity Between ASCD Clutch Switch Terminals 1 And 2
    G07121456Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals