Work Procedure

1. PREPARATION BEFORE CALIBRATION PROCEDURE
   1. Park the vehicle on a level surface.
   2. Adjust air pressure of all tires to the specified pressure. "TIRE AIR PRESSURE ".

   GO TO 2.

2. PERFORM CALIBRATION

With CONSULT-III

1. Turn ignition switch ON.
   CAUTION: Never start engine.
2. Select "Work Support" mode in "ENGINE".
3. Select "G SENSOR CALIBRATION".
4. Touch "Start".

Is "COMPLETED" displayed? 

YES: END

NO: Perform steps 1 and 2 again.