Component Inspection

CHECK THROTTLE CONTROL MOTOR

Check resistance between electric throttle control actuator terminals as per the following.

RESISTANCE REFERENCE CHART

Terminals	Resistance
5 and 6	Approx. 1 - 15 Ω [at 25°C (77°F)]

Fig 1: Checking Resistance Between Electric Throttle Control Actuator Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES >> INSPECTION END

NO >> GO TO 2.

REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR
1. Replace electric throttle control actuator. Refer to INTAKE MANIFOLD COLLECTOR .
2. Go to "SPECIAL REPAIR REQUIREMENT ".
  INSPECTION END