Disassembly and Assembly: Disassembly

NOTE: Before disassembly, note the proper placement of the wires to the correct terminals and correct wire routing to the terminals.

Disconnect the red, white, and double black wire connectors.
- Press the tabs on the terminals to release the locking tabs.
  
  Fig 1: Locating Red, White And Double Black Wire Connectors
  Courtesy of NISSAN MOTOR CO., U.S.A.
Release the two clips and remove the fuel temperature sensor from the pump assembly.

Fig 2: Releasing Clips
Courtesy of NISSAN MOTOR CO., U.S.A.
Release the tab (A) and slide the level sending unit module and floater arm assembly (B) up to remove.

Fig 3: Releasing Tab
Courtesy of NISSAN MOTOR CO., U.S.A.