BCM : Work Procedure
WARNING: This page is about a different variant/trim than selected.
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to , "DESCRIPTION ".
NOTE: If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.GO TO 2.
- REPLACE BCM
Replace BCM. Refer to , "REMOVAL AND INSTALLATION ".
GO TO 3.
- WRITING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specifications. Refer to , "WORK PROCEDURE ".
GO TO 4.
- INITIALIZE BCM (NATS)
Perform BCM initialization. (NATS)
WORK END