LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Security Control System (CROSSCABRIOLET)) >> DTC/Circuit Diagnosis >> DTC B260F: Engine Status >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to , "DTC LOGIC ".
  • If DTC B260F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to , "DTC LOGIC ".
DTC DETECTING CONDITION AND POSSIBLE CAUSES

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B260F ENG STATE SIG LOST BCM is not yet received the engine status signal from ECM when ignition switch is in ON position
  • Harness or connectors (The CAN communication line is open or shorted.)
  • ECM
scientia non olet · About LEMON Manuals