BCM : Work Procedure

SAVING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "CONFIGURATION (BCM) : DESCRIPTION ".

NOTE: If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.

Go to 2.
REPLACE BCM
Replace BCM. Refer to "REMOVAL AND INSTALLATION ".

Go to 3.
WRITING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to "CONFIGURATION (BCM) : WORK PROCEDURE ".

Go to 4.
INITIALIZE BCM (NATS)
Perform BCM initialization. (NATS)

WORK END