Detailed Flow
- COLLECT THE INFORMATION FROM THE CUSTOMER
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnosis worksheet. Refer to "DIAGNOSTIC WORK SHEET ".
Go to 2.
- PERFORM THE SELF-DIAGNOSIS
Perform self-diagnosis for "ABS" with CONSULT-III. Refer to "CONSULT-III FUNCTION ".
Is there any DTC displayed?
YES: Go to 3.
NO: Go to 4.
- PERFORM THE SYSTEM DIAGNOSIS
Perform the diagnosis applicable to the displayed DTC of "ABS" with CONSULT-III. Refer to "DTC INDEX ".
Go to 7.
- CHECK THE SYMPTOM THAT IS NOT CONSIDERED A SYSTEM MALFUNCTION
Check that the symptom is a normal operation that is not considered a system malfunction. Refer to "DESCRIPTION ".
Is the symptom a normal operation?
YES: INSPECTION END
NO: Go to 5.
- CHECK THE WARNING LAMP FOR ILLUMINATION
Check that the warning lamp illuminate.
- ABS warning lamp: Refer to "DESCRIPTION ".
- Brake warning lamp: Refer to "DESCRIPTION ".
Is ON/OFF timing normal?
YES: Go to 6.
NO: Go to 2.
- PERFORM THE DIAGNOSIS BY SYMPTOM
Perform the diagnosis applicable to the displayed DTC of "ABS" with CONSULT-III.
Go to 7.
- REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.
Go to 8.
- MEMORY CLEAR
Perform self-diagnosis memory clear for "ABS" with CONSULT-III.
Go to 9.
- FINAL CHECK
Perform the again, and check that the malfunction is repaired completely.
Is no other DTC present and the repair completed?
YES: INSPECTION END
NO: Go to 3.