LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Rogue SV, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component And System Testing - For CALIFORNIA >> ASCD Brake Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK FOR ASCD BRAKE SWITCH FUNCTION

    With CONSULT-III 

    1. Turn ignition switch ON.
    2. Select "BRAKE SW1" in "DATA MONITOR" mode with CONSULT-III.
    3. Check "BRAKE SW1" indication under the following conditions.
    MONITOR ITEMS CONDITION CHART

    Monitor item Condition Indication
    BRAKE SW1 Brake pedal Slightly depressed OFF
    Fully released ON

    Without CONSULT-III 

    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector and ground.
    VOLTAGE REFERENCE CHART

    ECM Ground Condition Voltage
    Connector Terminal
    E16 110 (ASCD brake switch signal) Ground Brake pedal Slightly depressed Approx. 0 V
    Fully released Battery voltage

    Is the inspection result normal? 

    YES: INSPECTION END.

    NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals