LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Sentra SE-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0181 To P0500 (MR20DE) (Except CALIFORNIA) >> DTC P0452 EVAP Control System Pressure Sensor >> DTC Confirmation Procedure >> With GST
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With GST

  1. Start engine and warm it up to normal operating temperature.
  2. Check that voltage between ECM terminal 43 (Fuel tank temperature sensor signal) and ground is less than 4.2 V.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Start engine and wait at least 20 seconds.
  5. Select Service $07 with GST.

    If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".

    Fig 1: Checking Voltage Between ECM Terminal 43 And Ground
    G07140070Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals