April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Valve Upper Body: Assembly: Notes

CAUTION:

Apply ATF to all components before installation.
Lay control valve body down when installing valves. Do not stand control valve body upright.

Fig 1: Precaution For Sliding Surfaces Of Valves
Courtesy of NISSAN MOTOR CO., U.S.A.

Lubricate control valve body and all valves with ATF. Install control valves by sliding them carefully into their bores.

CAUTION:

Install each control valve one by one.
Install control valves after checking, because some of them are similar.
Be careful not to scratch or damage valve body.

Fig 2: Installing Control Valves
Courtesy of NISSAN MOTOR CO., U.S.A.

Wrap a small suitable tool (A) with vinyl tape and use it to insert valves into their proper positions.

Fig 3: Tapping Valves Using Suitable Tool
Courtesy of NISSAN MOTOR CO., U.S.A.
Install retainer plates (1).
- While pushing plug or return spring, install retainer plate (1) using a suitable tool (A).
  
  Fig 4: Installing Retainer Plates
  Courtesy of NISSAN MOTOR CO., U.S.A.