System Description: Inputs
Power is supplied at all times
- through 40A fusible link (letter g , located in the fuse and fusible link box)
- to BCM terminal 70
- through 10A fuse [No. 8, located in the fuse block (J/B)]
- to BCM terminal 57.
When the key switch is ON (key is inserted in ignition key cylinder), power is supplied
- through 10A fuse [No. 14, located in the fuse block (J/B)]
- through key switch terminals 2 and 1
- to BCM terminal 37.
When the ignition switch is ACC or ON, power is supplied
- through 10A fuse [No. 20, located in the fuse block (J/B)]
- to BCM terminal 11.
Ground is supplied
- to BCM terminal 67
- through body grounds M57 and M61.
When the front door switch LH is ON (door is OPEN), ground is supplied
- to BCM terminal 47
- through front door switch LH terminal 2
- through front door switch LH case ground.
When the front door switch RH is ON (door is OPEN), ground is supplied
- to BCM terminal 12
- through front door switch RH terminal 2
- through front door switch RH case ground.
When the rear door switch LH is ON (door is OPEN), ground is supplied
- to BCM terminal 48
- through rear door switch LH terminal 1
- through rear door switch LH case ground.
When the rear door switch RH is ON (door is OPEN), ground is supplied
- to BCM meter terminal 13
- through rear door switch RH terminal 1
- through rear door switch RH case ground.
When the back door lock assembly (back door switch) (hatchback) is ON (back door is OPEN), ground is supplied
- to BCM terminal 43
- through back door lock assembly (back door switch) terminals 3 and 4
- through body grounds B117, B132 and D402.
Keyfob signal is inputted to BCM from remote keyless entry receiver.
The remote keyless entry system controls operation of the
- power door lock
- hazard reminder
- auto door lock
- panic alarm
- room lamp