Common Specifications & Procedures
VERSA COMMON SPECIFICATIONS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Manual A/C | |||
| Service | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Torque | See Torque Specifications in Text and applicable graphics in MANUAL AIR CONDITIONER article. | ||
| Axle Nut/Hub Nut | |||
| Front Axle Nut | 113 N.m (83 Ft.lbs) | ||
| Rear Hub Bolts | 94 N.m (70 Ft.lbs) | ||
| Battery | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc & Drum Brakes | |||
| Front | FRONT DISC BRAKE | ||
| Rear | REAR DRUM BRAKE | ||
| Torque | |||
| Front | See Torque Specifications in Text and applicable graphics under COMPONENT . | ||
| Rear | See Torque Specifications in Text and applicable graphics under COMPONENT . | ||
| Charging | |||
| Generator | GENERATOR | ||
| Torque | REMOVAL AND INSTALLATION | ||
| Drive Belts | |||
| Adjustment | TENSION ADJUSTMENT (HR16DE) or TENSION ADJUSTMENT (MR18DE) | ||
| Belt Routing | DRIVE BELTS (HR16DE) or DRIVE BELTS (MR18DE) | ||
| Engine Cooling | |||
| General Service Specifications | SERVICE DATA AND SPECIFICATIONS (SDS) (HR16DE) or SERVICE DATA AND SPECIFICATIONS (SDS) (MR18DE) | ||
| Radiator Cap Pressure | 78-98 kPa (0.78-0.98 kgf/cm2 , 11-14 psi) | ||
| Thermostat R & I | THERMOSTAT (HR16DE) or THERMOSTAT (MR18DE) | ||
| Water Pump R & I | WATER PUMP (HR16DE) or WATER PUMP (MR18DE) | ||
| Engine Mechanical | |||
| Compression | GENERAL SPECIFICATION (HR16DE) or GENERAL SPECIFICATIONS (MR18DE) | ||
| Oil Pressure | |||
| @ Idle | 60 kPa (0.6 kgf/cm2 , 9 psi) or more | ||
| @ 2000 RPM | 200 kPa (2.0 kgf/cm2 , 29 psi) (HR16DE) or 270 kPa (2.7 kgf/cm2 , 39 psi) (MR18DE) | ||
| Overhaul | SERVICE DATA AND SPECIFICATIONS (SDS) (HR16DE) or SERVICE DATA AND SPECIFICATIONS (SDS) (MR18DE) | ||
| Torque | See Torque Specifications in Text and applicable graphics in ENGINE MECHANICAL (HR16DE) or ENGINE MECHANICAL (MR18DE) articles. | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate (Drive Plate) Torque | 108 N.m (80 Ft.lbs) | ||
| Fuel System | |||
| Fuel Pressure Release Procedure | FUEL PRESSURE RELEASE (HR16DE) or FUEL PRESSURE RELEASE (MR18DE) | ||
| Fuel Pressure Specification | At Idling: Approximately 350 kPa (3.57 kg/cm2 , 51 psi) | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE CHECK (HR16DE) or FUEL PRESSURE CHECK (MR18DE) | ||
| Fuel Filter Location | In Tank Type | ||
| Fuel Filter R & I | FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | Engine has coil-on-plug ignition. | ||
| Ignition Wires (Routing) | Engine has coil-on-plug ignition. | ||
| Spark Plugs | SPARK PLUG
(HR16DE) or IGNITION COIL, SPARK PLUG AND ROCKER COVER
(MR18DE) Tightening torque: 19.6 N.m (14 Ft. Lbs) |
||
| Starting | |||
| Starter | STARTER | ||
| Torque | See Torque Specifications in Text and applicable graphics in REMOVAL AND INSTALLATION HR16DE or REMOVAL AND INSTALLATION MR18DE . | ||
| Wheel Alignment | |||
| Adjustment Specifications | |||
| Front | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Rear | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Torque | |||
| Front | See Torque Specifications in applicable graphics under FRONT SUSPENSION ASSEMBLY . | ||
| Rear | See Torque Specifications in applicable graphics under REAR SUSPENSION ASSEMBLY . | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 113 N.m (12 kg.m, 83 Ft.lbs) | ||
| How To Use Nissan Service Information | |||
| Includes: Standard Bolt Torque Symbol Identification General Connector Info |
GENERAL INFORMATION | ||