Work Flow

Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnosis worksheet. Refer to DIAGNOSTIC WORK SHEET .

GO TO  2.

Perform self diagnostic result. Refer to CONSULT FUNCTION (ABS) .

Are any DTCs displayed? 

YES: Refer to DTC NO. INDEX .

NO: GO TO  3.

Check that the symptom is a normal operating condition. Refer to DESCRIPTION .

Is the symptom a normal operating condition? 

YES: Inspection End.

NO: GO TO  4.

Check warning and indicator lamps operation.

• ABS warning lamp: Refer to DESCRIPTION .
• brake warning lamp: Refer to DESCRIPTION .
• VDC OFF indicator lamp: Refer to DESCRIPTION .
• SLIP indicator lamp: Refer to DESCRIPTION .

  Is ON/OFF timing normal? 

  YES: GO TO  5.

  NO: Perform warning lamp diagnosis. Refer to COMPONENT FUNCTION CHECK  (ABS warning lamp), COMPONENT FUNCTION CHECK  (brake warning lamp), COMPONENT FUNCTION CHECK  (VDC OFF indicator lamp) or COMPONENT FUNCTION CHECK  (SLIP indicator lamp).

Perform diagnosis applicable to the symptom. Refer to SYMPTOM TABLE .

GO TO  6.

Perform self diagnostic result again, and check that the malfunction is repaired. After checking, erase the self diagnosis memory. Refer to CONSULT FUNCTION (ABS) .

Inspection End.