LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Altima SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Security Control System (Coupe)) >> Basic Inspection >> Inspection And Adjustment >> ECM Re-Communicating Function >> ECM RE-COMMUNICATING FUNCTION: Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM RE-COMMUNICATING FUNCTION: Description

WARNING: This page is about a different variant/trim than selected.

Performing following procedure can automatically perform re-communication of ECM and BCM, but only when the ECM has been replaced with a new one (*1).

*1: New one means an ECM which has never been energized on-board.

(In this step, initialization procedure by CONSULT is not necessary)

NOTE:
  • When registering new Key IDs or replacing the ECM that is not brand new, refer to CONSULT Immobilizer mode and follow the on-screen instructions.
  • If multiple keys are attached to the key holder, separate them before work.
  • Distinguish keys with unregistered key ID from those with registered ID.
scientia non olet · About LEMON Manuals