DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
NOTE:
- If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC "
- If DTC B210F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC ".
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B210F |
INTER LOCK/TRANSMISSION RANGE SW ON |
IPDM E/R detects a mismatch between the signals below for 1 second or more.
- Clutch interlock input signal (M/T models)
- Shift transmission range switch input signal (CVT models)
- Shift position signal from BCM (CAN)
|
- Harness or connectors [Transmission range switch circuit is open or shorted (CVT models)] or (Clutch interlock switch circuit is open or shorted.)
- Clutch interlock switch (M/T models)
- Transmission range switch (CVT models)
|