LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Altima SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Security Control System (Coupe)) >> DTC/Circuit Diagnosis >> DTC B2617: Starter Relay Circuit >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • If DTC B2617 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B2617 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
  • If DTC B2617 is displayed with DTC B2611, first perform the trouble diagnosis for DTC B2611. Refer to "DTC LOGIC ".
  • If DTC B2617 is displayed with DTC B210E, first perform the trouble diagnosis for DTC B210E. Refer to "DTC LOGIC ".
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B2617 STARTER RELAY CIRCUIT
  • An immediate operation of starter relay is requested by BCM, but there is no response for more than 1 second
  • BCM is not commanding starter relay activation, but BCM detects starter relay output is active
  • Harness or connectors (Starter relay circuit is open or shorted.)
  • IPDM E/R
scientia non olet · About LEMON Manuals