DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
NOTE:
- If DTC B26E1 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC ".
- If DTC B26E1 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC ".
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B260F |
NO RECEPTION OF ENGINE STATUS SIGNAL |
BCM does not receive the engine status signal from ECM when ignition switch is in the ON position |
|