| All DTC Reading |
Display all DTCs or diagnostic items that all ECUs are recording and judging. |
| Work Support |
This mode enables a technician to adjust some devices faster and more accurately. |
| Self Diagnostic |
Results Retrieve DTC from ECU and display diagnostic items. |
| Data Monitor |
Monitor the input/output signal of the control unit in real time. |
| CAN Diagnosis |
This mode displays a network diagnosis result about CAN by diagram. |
| CAN Diagnosis Support Monitor |
It monitors the status of CAN communication. |
| Active Test |
Send the drive signal from CONSULT to the actuator. The operation check can be performed. |
| DTC & SRT confirmation |
The status of system monitoring tests and the self-diagnosis status/result can be confirmed. |
| ECU Identification |
Display the ECU identification number (part number etc.) of the selected system. |
| Function Test |
This mode can show results of self-diagnosis of ECU with either "OK" or "NG". For engines, more practical tests regarding sensors/switches and/or actuators are available. |
| Configuration |
Function to READ/WRITE vehicle configuration. |
| Other |
Other results or histories, etc. that are recorded in ECU are displayed. |