| P2014 |
Tumble control valve position sensor circuit |
An excessively low or high voltage from the sensor is sent to ECM. |
- Harness or connectors (Tumble control valve position sensor circuit is shorted.)
(EVAP control system pressure sensor circuit is open or shorted.)
[Crankshaft position sensor (POS) circuit is shorted.)
(Accelerator pedal position sensor circuit is shorted.)
(Refrigerant pressure sensor circuit is shorted.)
(Battery current sensor circuit is shorted.)
- Tumble control valve position sensor
- EVAP control system pressure sensor
- Crankshaft position sensor (POS)
- Accelerator pedal position sensor
- Refrigerant pressure sensor
- Battery current sensor
|