Audio-Navigation Unit Connector E (16P) (with rear entertainment)

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Audio-Navigation Unit Connector E (16P) Connector Terminals (With Rear Entertainment)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Cavity

Wire Color

Terminal Name

Connect to

BRN⁽¹⁾

AUX VIDEO IN SH

Shield for terminals No. 2 and No. 9

LT BLU

AUX VIDEO IN GND

RES auxiliary jack assembly

BRN⁽¹⁾

RR NTSC SH

Shield for terminals No. 10 and No. 11

YEL

SYSTEM ACC

Rear controller and screen

BRN⁽¹⁾

RES AUDIO OUT SH

Shield for terminals No. 6, No. 13, and No. 14

RED

RES AUDIO OUT L

Rear controller and screen

BRN⁽¹⁾

GA-NET RR BUS SH

Shield for terminals No. 8 and No. 16

PUR

GA-NET RR BUS-

Rear controller and screen

PUR

AUX VIDEO IN

RES auxiliary jack assembly

E10

PNK

RR NTSC GND

Rear controller and screen

E11

BLU

RR NTSC

Rear controller and screen

E13

WHT

RES AUDIO OUT GND

Rear controller and screen

E14

BLK

RES AUDIO OUT R

Rear controller and screen

E16

LT BLU

GA-NET RR BUS+

Rear controller and screen

⁽¹⁾	The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.