LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Audio System) >> System Description >> XM Receiver Connector for Inputs and Outputs (Without AcuraLink) >> XM Receiver Connector A (14P)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

XM Receiver Connector A (14P)

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying XM Receiver Connector A (14P) Connector Terminals
G08054109Courtesy of AMERICAN HONDA MOTOR CO., INC.
Cavity Wire Color Terminal Name Connect to
A1 WHT + B No. 5 (10 A) fuse in the under-dash fuse/relay box
A2 RED ACC Audio-Navigation unit(2), Audio unit(3)
A3 BRN(1) GA-NET BUS A SH Shield for terminals No. 9 and No. 10
A5 RED AUDIO R+ Audio-Navigation unit(2), HandsFreeLink control unit(2), Audio unit(3)
A6 BLK AUDIO L+ Audio-Navigation unit(2), HandsFreeLink control unit(2), Audio unit(3)
A9 GRN GA-NET BUS A+ Audio-Navigation unit(2), Audio unit(3)
A10 RED GA-NET BUS A- Audio-Navigation unit(2), Audio unit(3)
A11 BLK GND Body ground to G606
A13 WHT AUDIO R- Audio-Navigation unit(2), HandsFreeLink control unit(2), Audio unit(3)
A14 GRN AUDIO L- Audio-Navigation unit(2), HandsFreeLink control unit(2), Audio unit(3)
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.
(2) With navigation
(3) Without navigation