Resetting the Power Window Control Unit: Notes
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
Reset the power window control unit after doing any of the following actions:
- Power window regulator replacement or repair.
- Power window motor replacement or repair.
- Window run channel replacement.
- Door glass replacement or repair.
- Driver's MPCS unit replacement.
- Front passenger's MPCS unit replacement.
- Power is disconnected from the driver's or front passenger's MPCS unit while the power window timer is ON.
NOTE:
If the passenger's window lost power when the key off timer was ON, it cannot be operated from the driver's switch and must be reset from the passenger's power window switch.