Interface Dial Inputs and Outputs
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
INTERFACE DIAL 5P CONNECTOR
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom | ||
|---|---|---|---|---|---|---|---|
| 1 | WHT | JOG BUS (Interface dial Jog) | Interface dial operation signal | 0-5 V pulses | If open: You can not operate the navigation system. If short to ground: You can not operate the navigation system. | ||
| 2 | BRN(1) | JOG SH (Interface dial Jog shield) | Shield for interface dial signal | --- | --- | ||
| 3 | BLK | GND (Ground) (G506) | Ground for interface dial | 0V | If open: You can not operate the navigation system. If short to ground: You can not operate the navigation system. | ||
| 4 | PUR | ACC (Accessory) | Power source for interface dial | Battery voltage at ACCESSORY (I) | If open: You can not operate the navigation system. If short to ground: Blows fuse No. 32 (10 A) in the under-dash fuse/relay box. | ||
|
|||||||