Rearview Camera Inputs and Outputs
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
REARVIEW CAMERA 6P CONNECTOR
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom | ||
|---|---|---|---|---|---|---|---|
| 1 | BLK | CAMERA VIDEO (NTSC signal) | Video signal for rearview camera | 1V AC | If open: No change to rearview camera image. If short to ground: No change to rearview camera image. | ||
| 2 | GRY(1) | CAMERA SH (Camera shield) | Shield for terminals No. 1, 3, 4, 5, 6 | 0V | If open: No rearview camera image. If short to ground: No change to rearview camera image. | ||
| 3 | YEL | CAMERA ADAPT (Adaptive camera) | Control signal for rearview camera | 0 V | If open: No change to rearview camera image. If short to ground: No change to rearview camera image. | ||
| 4 | GRN | CAMERA BIT 1 (Mode select signal) | Mode select signal for rearview camera | Top down view. 8V | If open: No change to rearview camera image. If short to ground: No change to rearview camera image. | ||
| 5 | RED | CAMERA BIT 0 (Mode select signal) | Mode select signal for rearview camera | Normal view: 8V | If open: No change to rearview camera image. If short to ground: No change to rearview camera image. | ||
| 6 | WHT | CAMERA VCC (VCC supply) | Power source for rearview camera | 8V | If open: When put into reverse, the navigation screen goes black (backlight still operation). If short to ground: When put into reverse, the navigation screen goes black (backlight still operative). | ||
|
|||||||