Windshield Wiper/Washer
WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
The MICU controls the windshield wiper motor and windshield washer motor based on input signals from each switch and B-CAN signals.
WINDSHIELD WIPER/WASHER REFERENCE TABLE
| - | Input | Output |
|---|---|---|
| MICU | IG1 power supply | Windshield Wiper motor (INT) |
| Windshield Wiper switch (INT) | Windshield Wiper motor (LO) | |
| Windshield Wiper switch (LO) | Windshield Wiper motor (HI) | |
| Windshield Wiper switch (HI) | Windshield Wiper motor | |
| Windshield Wiper switch (MIST) | ||
| Windshield Washer switch | ||
| Windshield Wiper motor (AUTO STOP) | ||
| Wiper switch intermittent dwell time controller | ||
| Brake pedal position switch | ||
| Transmission range switch (P) position (A/T) | ||
| B-CAN | IG1 METER signal | Windshield wiper switch (FRINT) message |
| Parking brake switch signal | Windshield wiper switch (FRWIPLO) message | |
| Vehicle speed pulse signal | Windshield wiper switch (FRWIPHI) message | |
| Windshield washer switch (FRWASH) message | ||
| Windshield wiper motor (FRWIPAS) message |