LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Audio System) >> System Description >> Audio Unit Connector for Inputs and Outputs >> With navigation >> Audio-Navigation Unit Connector E (14P)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Audio-Navigation Unit Connector E (14P)

WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Audio-Navigation Unit Connector E (14P)
G06768788Courtesy of AMERICAN HONDA MOTOR CO., INC.
CONNECTOR PINOUTS DESCRIPTION CHARTCONNECTOR PINOUTS DESCRIPTION CHARTCONNECTOR PINOUTS DESCRIPTION CHART

Cavity Wire Connects to
E1 ORN USB adapter unit (+ B)
E2 BLU USB adapter unit (SYS ACC)
E3 GRY(1) Shield for terminals No. 9 and No. 10 (GA-NET BUS SH)
E4 GRY(1) Shield for terminals No. 5, No. 6, No. 13, and No. 14 (AUDIO SH)
E5 BLK USB adapter unit (AUDIO R+)
E6 WHT USB adapter unit (AUDIO L+)
E9 YEL USB adapter unit (GA-NET BUS +)
E10 GRN USB adapter unit (GA-NET BUS-)
E11 PNK USB adapter unit (GND)
E13 RED USB adapter unit (AUDIO R-)
E14 GRN USB adapter unit (AUDIO L-)
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.