| P0335 |
Crankshaft position sensor (POS) circuit |
- The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
- The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
- The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.
|
- Harness or connectors [Crankshaft position sensor (POS) circuit is open or shorted.]
(Refrigerant pressure sensor circuit is shorted.)
(Accelerator pedal position sensor circuit is shorted.)
(EVAP control system pressure sensor circuit is shorted.)
(Battery current sensor circuit is shorted.)
(Tumble control valve position sensor circuit is shorted.)
- Crankshaft position sensor (POS)
- Refrigerant pressure sensor
- Accelerator pedal position sensor
- EVAP control system pressure sensor
- Signal plate
- Battery current sensor
- Tumble control valve position sensor
|