LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Cube S, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS U0101 To P0132 (CALIFORNIA) >> DTC P0112, P0113: IAT Sensor >> DTC Logic >> DTC Confirmation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    >> GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON and wait at least 5 seconds.
    2. Check 1st trip DTC.

      Is 1st trip DTC detected? 

      YES >> Go to "DIAGNOSIS PROCEDURE ".

      NO >> INSPECTION END