LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Cube SL >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Security Control System (Without Intelligent Key System) >> Ecu Diagnosis Information >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Fail-Safe >> Can Communication Control >> If No CAN Communication Is Available With BCM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

If No CAN Communication Is Available With BCM

Control part Fail-safe operation
Headlamp
  • Turns ON the headlamp low relay when the ignition switch is turned ON
  • Turns OFF the headlamp low relay when the ignition switch is turned OFF
  • Headlamp high relay OFF
  • Daytime running light relay OFF(1)
  • Parking lamps
  • Side marker lamps
  • License plate lamps
  • Illuminations
  • Tail lamps
  • Turns ON the tail lamp relay when the ignition switch is turned ON
  • Turns OFF the tail lamp relay when the ignition switch is turned OFF
Front wiper
  • The status just before activation of fail-safe control is maintained until the ignition switch is turned OFF while the front wiper is operating at LO or HI speed.
  • The wiper is operated at LO speed until the ignition switch is turned OFF if the failsafe control is activated while the front wiper is set in the INT mode and the front wiper motor is operating.
Front fog lamps Front fog lamp relay OFF
Rear window defogger relay Rear window defogger relay OFF
Horn Horn OFF
(1) With daytime running light system
scientia non olet · About LEMON Manuals