Audio-Navigation Unit Inputs and Outputs For Connector C (8P)
WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
AUDIO-NAVIGATION UNIT CONNECTOR C (8P) - SYMPTOM TABLE
| Audio-navigation Unit Connector C (8P) | |||||
|---|---|---|---|---|---|
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom |
| 1 | PNK | +B BACK UP | Continuous power source | Battery voltage | If open: Display picture goes out (display back light still on).
NOTE:
System will reboot to enter code screen. If short to ground: Blows fuse No. 1 (7.5 A) in the under-dash fuse/relay box. |
| 4 | BLK | GND | Ground for audio-navigation unit | 0V | If open: No effect on system. If short to ground: No effect on system. |
| 5 | GRN | BACK LT- | Reverse signal of select lever from multiplex integrated control unit (A/T) | In reverse, battery voltage: Otherwise 0 V |
If open: Navigation never sees the reverse signal when in reverse. Diagnostic screen Car Status, Back = 0. If short to ground: Blows fuse No. 1 (7.5 A) in the under-dash fuse/relay box. |