| BATTERY VOLT [V] |
x |
x |
Indicates voltage supply to differential lock control unit. |
| 4WD MODE [2H/4H/4Lo] |
x |
x |
Indicates condition of 4WD shift switch signal received from transfer control unit on CAN communication line. |
| VHCL S/SEN-R [km/h] or [mph] |
x |
- |
Indicates right rear wheel speed signal received from ABS actuator and electric unit (control unit) on CAN communication line (approx. vehicle speed). |
| VHCL S/SEN-L [km/h] or [mph] |
x |
- |
Indicates left rear wheel speed signal received from ABS actuator and electric unit (control unit) on CAN communication line (approx. vehicle speed). |
| VHCL S/SEN-RL [km/h] or [mph] |
x |
x |
Indicates average of rear wheel speed signal (left and right) received from ABS actuator and electric unit (control unit) on CAN communication line. |
| D-LOCK SW SIG [On/Off] |
x |
x |
Indicates condition of differential lock mode switch. |
| D-LOCK SIG [On/Off] |
x |
x |
Indicates condition of differential lock. |
| RELAY ON [On/Off] |
x |
x |
Indicates operating condition of differential lock solenoid relay (integrated in differential lock control unit). |
| RELAY MTR [On/Off] |
x |
x |
Indicates control status of differential lock solenoid relay (integrated in differential lock control unit). |
| SOL MTR [On/Off] |
x |
x |
Indicates condition of differential lock solenoid. |
| IND MTR [On/Off] |
x |
x |
Indicates condition of DIFF LOCK indicator lamp. |
| D-LOCK POS SW [On/Off] |
x |
x |
Indicates condition of differential lock position switch |