Description

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT

VCM : Description

Performing the following procedure can automatically activate recommunication of VCM and BCM, but only when the VCM is replaced with a new one*.
*: New one means a virgin VCM that has never been energized on-board.
(In this step, initialization procedure using CONSULT is not necessary)
NOTE:
-When the replaced VCM is not a brand new, the initialization of BCM using CONSULT is necessary.
-If multiple keys are attached to the key holder, separate them before beginning work.
-Distinguish keys with unregistered key IDs from those with registered IDs.