Confirmation/Adjustment Mode: Notes

Start the diagnosis function and select "Confirmation/Adjustment". The confirmation/adjustment mode indicates where each item can be checked or adjusted.
Select each switch on the "Confirmation/Adjustment Mode" screen to display the relevant trouble diagnosis screen. Press the "Back" switch to return to the initial Confirmation/Adjustment Mode screen.

Fig 1: Display - Confirmation/Adjustment Mode
Courtesy of NISSAN NORTH AMERICA, INC.

Display Diagnosis

Fig 2: Display - Diagnosis Screen

Courtesy of NISSAN NORTH AMERICA, INC.

Vehicle Signals

A comparison check can be made of each actual vehicle signal and the signals recognized by the system.

Fig 3: Display - Vehicle Signals

Courtesy of NISSAN NORTH AMERICA, INC.

Diagnosis item	Display	Vehicle status	Remarks
Vehicle speed	ON	Vehicle speed > 0 km/h (0 MPH)	Changes in indication may be delayed. This is normal.
Vehicle speed	OFF	Vehicle speed = 0 km/h (0 MPH)
Parking brake	ON	Parking brake is applied.
Parking brake	OFF	Parking brake is released.
Lights	ON	Block the light beam from the auto light optical sensor when the light switch is ON.	-
Lights	OFF	Either of the following conditions Lighting switch OFF Expose the auto light optical sensor to light when the light switch is ON.	-
Power bottun	ON	Power bottun ON	-
Power bottun	OFF	Power bottun in ACC position	-
Reverse	ON	Shift the selector lever to "R" position	Changes in indication may be delayed. This is normal.
Reverse	OFF	Shift the selector lever other than "R" position	Changes in indication may be delayed. This is normal.

Navigation