MULTI AV SYSTEM: Fail-safe: Control
When the system is in the fail-safe status at or after start of the AV control unit, the following functions are restricted.
| Function | In fail-safe mode | |
|---|---|---|
| A/C | Display | No display (fail-safe status display) |
| Audio | Operation | Mute audio |
| Display | No display (fail-safe status display) | |
| Camera | Operation | It cannot be operated |
| Display | Only composite (camera image) is displayed and superimpose (warning display and image quality display) is not displayed. | |
| Hands-free phone | Operation | It cannot be operated |
| Navigation | Operation | It cannot be operated |
| Display | Operation | Open/close operation is available |
| Display | Fail-safe factors are displayed | |
| Self-diagnosis | It cannot be diagnosed | |
| CONSULT diagnosis | It cannot be diagnosed | |
| AV communication diagnosis | It cannot be diagnosed | |
| Frequency transmission for VCM | Normal | |
| SD read access | Access cannot be gained. | |
| SD write access | Access cannot be gained. | |