Detail Flow
COMPONENT DESCRIPTION CHART
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Door switch/Ignition switch | - | Driver seat control unit receives the signals of ignition switch signal and front door switch from BCM via CAN communication. |
| 2 | - | Motors (sliding, tilt) | Driver seat control unit operates the sliding motor when the operating conditions are satisfied and requests the operation of tilt motor to automatic drive positioner control unit via UART communication. The automatic drive positioner control unit operates the tilt motor. |
| Sensors (sliding, tilt) | - | Each sensor monitors the operating positions of seat and steering column, then stops the operation of motor when each part reaches the recorded address. |