LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Security Control System (CROSSCABRIOLET)) >> DTC/Circuit Diagnosis >> DTC B210F: Shift Position/Clutch Interlock Switch >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.
NOTE: If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC "
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210F INTRLCK/PNP SW ON IPDM E/R detects a mismatch between the signals below for 1 second or more.
  • P/N position signal from TCM
  • Shift position signal from BCM (CAN)
  • Harness or connectors

    (The CAN communication line is open or shorted.)

  • Harness or connectors

    (TCM circuit is open or shorted.)

  • TCM