DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.

NOTE:

If DTC B2601 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
If DTC B2601 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B2601	SHIFT POSITION	BCM detects a difference between the P position signal from CVT sift selector (detention switch) and the P position signal from IPDM E/R (CAN) for 2 seconds or more	Harness or connectors (The CAN communication line is open or shorted.) Harness or connectors [CVT shift selector (detention switch) circuit is open or shorted.] CVT shift selector (detention switch)