Component Parts: TCM
WARNING: This page is about a different variant/trim than selected.
TCM transmits the shift position signal (P/N position) to BCM via CAN communication.
BCM confirms the selector lever position with the following 5 signals.
- P position signal from CVT shift selector (detention switch)
- P/N position signal from TCM
- P position signal from IPDM E/R (CAN)
- P/N position signal from IPDM E/R (CAN)
- P/N position signal from TCM (CAN)
IPDM E/R confirms the selector lever position with the following 3 signals.
- P position signal from CVT shift selector (detention switch)
- P/N position signal from TCM
- P/N position signal from BCM (CAN)