System Description
WARNING: This page is about a different variant/trim than selected.
- PDS (POWER DISTRIBUTION SYSTEM) is the system that BCM controls with the operation of the pushbutton ignition switch and performs the power distribution to each power circuit. This system is used instead of the mechanical power supply changing mechanism with the operation of the conventional key cylinder.
- The push-button ignition switch can be operated when Intelligent Key is in the following condition.
- Intelligent Key is in the detection area of the inside key antenna
- Insert Intelligent Key into the key slot
- The push-button ignition switch operation is input to BCM as a signal. BCM changes the power supply position according to the status and operates the following relays to supply power to each power circuit.
- Ignition relay (inside IPDM E/R)
- Ignition relay (inside fuse block)
- Accessory relay
- Blower relay
NOTE: The push-button ignition switch operation changes due to the conditions of brake pedal, selector lever and vehicle speed. - The power supply position can be confirmed with the lighting of the indicators around the push-button ignition switch.