Conditions Of Vehicle (Operating Conditions)

Engine start function is ON when setting on CONSULT.
Mechanical key is not inserted in key cylinder.
One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.

Symptom	Diagnosis/service procedure	Refer to
Ignition switch does not turn on with Intelligent Key. [green "KEY" lamp is displayed]	1. Check steering lock solenoid.	B2013 ID DISCORD I-KEY-STRG
	2. Replace Intelligent Key unit.	INTELLIGENT KEY UNIT
Ignition switch does not turn on with Intelligent Key. ["KEY" lamp does not display]	1. Check Intelligent Key unit power supply and ground circuit.	POWER SUPPLY AND GROUND CIRCUIT
	2. Check ignition knob switch.	IGNITION KNOB SWITCH
	3. Check key switch (BCM input).	KEY SWITCH (BCM INPUT)
	4. Check key switch (Intelligent Key unit input).	KEY SWITCH (INTELLIGENT KEY UNIT INPUT)
	5. Replace Intelligent Key unit.	INTELLIGENT KEY UNIT
	6. Check green "KEY" indicator.	WARNING LAMP
	7. Check red "KEY" indicator.	WARNING LAMP
Ignition switch does not turn on with Intelligent Key. [red "KEY" lamp is displayed]	1a. Check inside key antenna 1 (instrument panel).	INSTRUMENT PANEL AREA ANTENNA
	1b. Check inside key antenna 2 (luggage compartment).	CENTER CONSOLE AREA ANTENNA
	1c. Check inside key antenna 3 (center console).	LUGGAGE AREA ANTENNA
	2. Replace Intelligent Key unit.	INTELLIGENT KEY UNIT
Ignition switch does not turn on with mechanical key	1. Check key switch (BCM input).	KEY SWITCH (BCM INPUT)
Ignition switch does not turn on with mechanical key	2. Check key switch (Intelligent Key unit input).	KEY SWITCH (INTELLIGENT KEY UNIT INPUT)
Engine cannot be cranked with transmission in "Park" or in "Neutral" position with brake pedal depressed	1. Check transmission signal.	P0705 TRANSMISSION RANGE SENSOR A
	2. Check stop lamp switch.	WIRING DIAGRAM
"P-SHIFT" indicator does not operate properly	1. Check "P-SHIFT" indicator.	WARNING LAMP