Audio Function
The audio system is equipped with the following functions.
| FUNCTION |
|---|
| AM/FM radio |
| Satellite radio |
| CD |
| Music Box (flash memory) |
| USB connection |
Operating Signal
Audio system operation can be performed with multifunction switch, preset switch, or steering switch.
- Operating signal is transmitted to AV control unit with AV communication when it is operated by multifunction switch or preset switch.
- The disk eject signal is transmitted to AV control unit by hard wire, when disk eject switch is operated.
- Operating signal is transmitted to AV control unit with steering switch signal when it is operated by steering switch.
- Operation status of audio is indicated at front display by RGB image signal, RGB area signal, and RGB image synchronizing signal.
AM/FM Radio Function
- AM/FM radio tuner is built into AV control unit.
- AM/FM radio wave is received by radio antenna, next it is amplified by antenna amp., and finally it is input to AV control unit.
- FM radio wave is received by FM sub antenna, and it is transmitted to the AV control unit directly.
- Audio signal is input to BOSE amp. and BOSE amp. outputs to woofer and each speaker.
Satellite Radio Mode
- Satellite radio tuner is controlled by communication signal and request signal with AV control unit.
- Sound signal (satellite radio) is received by satellite radio antenna and transmitted to AV control unit via satellite radio tuner.
- AV control unit outputs audio signal (satellite radio) to BOSE amp. The signal is also outputted from BOSE amp. to woofer and each speaker.
CD Mode
- CD function is built into AV control unit.
- AV control unit outputs audio signal to BOSE amp. The signal is also outputted from BOSE amp. to woofer and each speaker when CD is inserted to AV control unit.
- For further information about CD function specifications, refer to "AV CONTROL UNIT ".
Music Box Mode
- Music CD data is stored on flash memory that is built into AV control unit, and it can be played.
- AV control unit outputs music (sound signal) that is stored on flash memory to BOSE amp. The signal is also outputted from BOSE amp. to woofer and each speaker.
- For further information about music box function specifications, refer to "AV CONTROL UNIT ".
USB Connection Function
- Connecting iPod® or USB memory allows the driver to play iPod® music files or USB memory-stored music files.
- Sound signals of music files stored in iPod® or USB memory is transmitted from the USB connector to the AV control unit.
- AV control unit outputs sound signal to BOSE amp. The signal is also outputted from BOSE amp. to woofer and each speaker.
- iPod® is recharged when connected to USB connector.
- Compliant USB memory and data recorded are limited.
USB memory USB1.1 File system FAT16 FAT32 - Only files that meet the following conditions will be played.
Music file File format "MP3", "WMA" File extension ".mp3", ".wma" Maximum file size 2 GB
NOTE:
- iPod® is a trademark of Apple inc., registered in the U.S. and other countries.
- Image signals cannot be received from iPod® or USB memory.
- Use the enclosed USB harness when connecting iPod® to USB connector.