DTC Confirmation Procedure

1. Press push-button ignition switch under the following conditions to start engine, and wait 5 seconds or more.
   • Selector lever: In the P position
   • Brake pedal: Depressed
2. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.

Is DTC detected? 

YES: Go to "Diagnosis Procedure ".

NO: GO TO 2.

1. Stop engine.
2. Perform DTC CONFIRMATION PROCEDURE for DTC P1650. Refer to "DTC LOGIC ".
3. Turn ignition switch ON.
4. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.

Is DTC detected? 

YES: Refer to "Diagnosis Procedure ".

NO: INSPECTION END