Work Procedure

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

CHECK IGNITION TIMING
1. Attach timing light to loop wires as shown in the figure below.
  - Timing light (A)
  - <=: Vehicle front
    
    Fig 1: Identifying Timing Light
    Courtesy of NISSAN MOTOR CO., U.S.A.
2. Check ignition timing.
  INSPECTION END
  
  Fig 2: Identifying Timing Indicator
  Courtesy of NISSAN MOTOR CO., U.S.A.