AV Control Unit: Description: Notes
- The AV control unit is equipped with the following parts. It is the master unit integrated with functions and controls the multi-AV system.
Units equipped AM/FM electronic tuner CD/DVD drive USB interface Flash memory (music Box) Camera controller - Signals necessary for the vehicle information display function are received from ECM and the combination meter via CAN communication.
- Signals necessary for vehicle setting functions are sent and received with BCM via CAN communication.
- It inputs the signal for driving status recognition (vehicle speed signal, reverse signal, and parking brake signal).
- A predictive course line is generated on the camera image from the rear view camera, and it is shown on the front display.
- It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake).
NOTE:
For details of each functions, refer to
"MULTI AV SYSTEM: SYSTEM DESCRIPTION ".
AM/FM Electronic Tuner
The adoption of the PLL frequency synthesizer system enables the signal outputting with accurate frequencies.
CD/DVD drive
- It is CD-R/CD-RW compliant and enables MP3 and WMA files to play music.
- It displays the artist name, album title or song title recorded to the file by the ID3 tag/WMA tag display function.
- DVD playback function is equipped.
USB Interface
- Music can be played by connecting an iPod® or USB memory.
Flash memory
The adoption of the music box function enables the recording of music data to flash memory and the storing of approximately 2, 000 tracks at a maximum.
Camera Controller
- Warning message, width/distance guiding line and predictive course line are generated on the image from the rear view camera.
- The predictive course line is drawn based on the steering signal received from the steering sensor via CAN communication.