Self Diagnosis Result

In CONSULT self-diagnosis, self-diagnosis results and error history are displayed collectively.
The current malfunction indicates "CRNT". The past malfunction indicates "PAST".
The timing is displayed as "0" if any of the error codes [U1000], [U1010], [U1300] and [U1310] is detected. The counter increases by 1 if the condition is normal at the next ignition switch ON cycle.

SELF-DIAGNOSIS RESULTS DISPLAY ITEM

Error item	Description	Possible malfunction factor/Action to take
CAN COMM CIRCUIT [U1000]	CAN communication malfunction is detected.	Refer to "DIAGNOSIS PROCEDURE ".
CONTROL UNIT (CAN) [U1010]	CAN initial diagnosis malfunction is detected.	Replace the AV control unit if the malfunction occurs constantly. Refer to "REMOVAL AND INSTALLATION ".
CONTROL UNIT (AV) [U1310]	AV communication circuit initial diagnosis malfunction is detected.
Cont Unit [U1200]	AV control unit malfunction is detected.
CAN CONT [U1216]	AV control unit malfunction is detected.
ST ANGLE SEN CALIB [U1232]	Neutral position adjustment of the steering angle sensor is incomplete.	Adjust the neutral position of the steering angle sensor. Refer to "DIAGNOSIS PROCEDURE ".
FRONT DISP CONN [U1243]	When either one of the following items is detected: front display unit power supply and ground circuits malfunction is detected. communication circuits between AV control unit and front display unit.	Front display unit power supply and ground circuits. Refer to "FRONT DISPLAY UNIT: DIAGNOSIS PROCEDURE ". Communication circuits between AV control unit and front display unit.
SAT CONN [U1255]	When either one of the following items are detected: satellite radio tuner power supply and ground circuits are malfunctioning. communication circuits between AV control unit and satellite radio tuner are malfunctioning. request signal circuit between AV control unit and satellite radio tuner are malfunctioning.	Satellite radio tuner power supply and ground circuit. Refer to "SATELLITE RADIO TUNER: DIAGNOSIS PROCEDURE ". Communication circuit between AV control unit and satellite radio tuner. Request signal circuit between AV control unit and satellite radio tuner.
AV COMM CIRCUIT [U1300] SWITCH CONN [U1240]	When either one of the following items are detected: multifunction switch power supply and ground circuits are malfunctioning. AV communication circuits between AV control unit and multifunction switch are malfunctioning.	Multifunction switch power supply and ground circuits. AV communication circuits between AV control unit and multifunction switch.
AV COMM CIRCUIT [U1300] VIDEO DIST CONN [U1246]	When either one of the following items are detected: rear display unit power supply and ground circuits are malfunctioning. AV communication circuits between AV control unit and rear display unit are malfunctioning.	Rear display unit power supply and ground circuits. Refer to "REAR DISPLAY UNIT: DIAGNOSIS PROCEDURE ". AV communication circuits between AV control unit and rear display unit.
AV COMM CIRCUIT [U1300] HAND FREE CONN [U1256]	When either one of the following items is detected: TEL adapter unit power supply and ground circuits are malfunctioning. AV communication circuits between AV control unit and TEL adapter unit are malfunctioning.	TEL adapter unit power supply and ground circuits. Refer to "TEL ADAPTER UNIT: DIAGNOSIS PROCEDURE ". AV communication circuits between AV control unit and TEL adapter unit.
AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] VIDEO DIST CONN [U1246] HAND FREE CONN [U1256]	AV communication circuits between AV control unit and multifunction switch are malfunctioning.	AV communication circuits between AV control unit and multifunction switch.