| 2 (BR) |
13 (SB) |
Inverter VCC |
Input |
Ignition switch ACC |
- |
8.0 - 9.5 V |
8.8 V |
| 3 (P) |
14 (Y) |
Signal VCC |
Output |
Ignition switch ACC |
- |
8.0 - 9.5 V |
8.8 V |
| 5 |
- |
Shield |
- |
- |
- |
- |
- |
| 6 (W) |
1 (B) |
RGB image signal (G: green) |
Input |
Ignition switch ON |
Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen. |
Outputs waveform synchronized with RGB image. |
|
| 7 |
- |
Shield |
- |
- |
- |
- |
- |
| 8 (G) |
1 (B) |
Horizontal synchronizing (HP) signal |
Output |
Ignition switch ON |
- |
Waveform of 1.0 V - 5.5 V is Output. |
|
| 9 (B) |
1 (B) |
RGB area (YS) signal |
Input |
Ignition switch ON |
At RGB image is displayed. |
5.5 V or less |
5.0 V |
| |
|
|
|
|
At AUX image is displayed. |
Waveform of 0.8 V - 5.5 V is Input. |
|
| 11 (G) |
1 (B) |
Communication signal (CONT→DISP) |
Input |
Ignition switch ON |
When adjusting display brightness. |
Waveform of 0.4 V - 5.3 V is input. |
|
| 15 (B) |
4 (W) |
Composite image signal |
Input |
Ignition switch ON |
When DVD or AUX image is displayed. |
Outputs waveform synchronized with composite image. |
|
| 17 (R) |
1 (B) |
RGB image signal (R: red) |
Input |
Ignition switch ON |
Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen. |
Outputs waveform synchronized with RGB image. |
|
| 18 (B) |
1 (B) |
RGB image signal (B: red) |
Input |
Ignition switch ON |
Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen. |
Outputs waveform synchronized with RGB image. |
|
| 19 (W) |
1 (B) |
RGB synchronizing signal |
Input |
Ignition switch ON |
- |
Waveform of 0.8 V - 5.5 V is Input. |
|
| 20 (R) |
1 (B) |
Vertical synchronizing (VP) signal |
Output |
Ignition switch ON |
- |
Waveform of 1.0 V - 5.5 V is Output. |
|
| 21 |
- |
Shield |
- |
- |
- |
- |
- |
| 22 (R) |
1 (B) |
Communication signal (DISP→CONT) |
Output |
Ignition switch ON |
When adjusting display brightness. |
Waveform of 0.5 V or less - 3.5 V or more is Output. |
|
| 23 |
- |
Shield |
- |
- |
- |
- |
- |