Data Monitor

ALL SIGNALS

• Displays the status of the following vehicle signals inputted into the AV control unit.
• For each signal, actual signal can be compared with the condition recognized on the system.

  Display Item	Display	Vehicle status	Remarks
  VHCL SPD SIG	On	Vehicle speed >0 km/h (0 MPH)	Changes in indication may be delayed. This is normal.
  	Off	Vehicle speed =0 km/h (0 MPH)
  PKB SIG	On	Parking brake is applied.
  	Off	Parking brake is released.
  ILLUM SIG	On	Block the light from the auto light optical sensor when the lighting switch is 1st or 2nd.	-
  	Off	Either of the following conditions Lighting switch is OFF Expose the auto light optical sensor to light when the lighting switch is 1st or 2nd.
  IGN SIG	On	Ignition switch is ON
  	Off	Ignition switch is in ACC position
  REV SIG	On	Selector lever is in R position	Changes in indication may be delayed. This is normal.
  	Off	Selector lever is in any position other than R

SELECTION FROM MENU

Allows the technician to select which vehicle signals should be displayed and displays the status of the selected vehicle signals.