Data Monitor
Monitor item
| Monitor Item [Unit] | MAIN SIGNALS | Description |
|---|---|---|
| MOTOR FAN REQ [1/2/3/4] |
x | Displays the value of the cooling fan speed signal received from ECM via CAN communication. |
| AC COMP REQ [Off/On] |
x | Displays the status of the A/C compressor request signal received from ECM via CAN communication. |
| TAIL&CLR REQ [Off/On] |
x | Displays the status of the position light request signal received from BCM via CAN communication. |
| HL LO REQ [Off/On] |
x | Displays the status of the low beam request signal received from BCM via CAN communication. |
| HL HI REQ [Off/On] |
x | Displays the status of the high beam request signal received from BCM via CAN communication. |
| FR FOG REQ [Off/On] |
x | Displays the status of the front fog light request signal received from BCM via CAN communication. |
| FR WIP REQ [Stop/1LOW/Low/Hi] |
x | Displays the status of the front wiper request signal received from BCM via CAN communication. |
| WIP AUTO STOP [STOP P/ACT P] |
x | Displays the status of the front wiper stop position signal judged by IPDM E/R. |
| WIP PROT [Off/BLOCK] |
x | Displays the status of the front wiper fail-safe operation judged by IPDM E/R. |
| IGN RLY1 -REQ [Off/On] |
Displays the status of the ignition switch ON signal received from BCM via CAN communication. | |
| IGN RLY [Off/On] |
x | Displays the status of the ignition relay judged by IPDM E/R. |
| PUSH SW [Off/On] |
Displays the status of the push-button ignition switch judged by IPDM E/R. | |
| INTER/NP SW [Off/On] |
Displays the status of the shift position judged by IPDM E/R. | |
| ST RLY CONT [Off/On] |
Displays the status of the starter relay status signal received from BCM via CAN communication. | |
| IHBT RLY -REQ [Off/On] |
Displays the status of the starter control relay signal received from BCM via CAN communication. | |
| ST/INHI RLY [Off/ST/INHI/UNKWN] |
Displays the status of the starter relay and starter control relay judged by IPDM E/R. | |
| DETENT SW [Off/On] |
Displays the status of the CVT shift selector (detention switch) judged by IPDM E/R. | |
| S/L RLY -REQ [Off/On] |
NOTE:
The item is indicated, but not monitored.
|
|
| S/L STATE [LOCK/UNLK/UNKWN] |
NOTE:
The item is indicated, but not monitored.
|
|
| DTRL REQ [Off/On] |
Displays the status of the daytime running light request signal received from BCM via CAN communication.
NOTE:
This item is monitored only on the vehicle with daytime running light system.
|
|
| OIL P SW [Open/Close] |
Displays the status of the oil pressure switch judged by IPDM E/R. | |
| HOOD SW [Off/On] |
NOTE:
The item is indicated, but not monitored.
|
|
| HL WASHER REQ [Off/On] |
NOTE:
The item is indicated, but not monitored.
|
|
| THFT HRN REQ [Off/On] |
Displays the status of the theft warning horn request signal received from BCM via CAN communication. | |
| HORN CHIRP [Off/On] |
Displays the status of the horn reminder signal received from BCM via CAN communication. | |
| CRNRNG LMP REQ [Off/On] |
NOTE:
The item is indicated, but not monitored.
|