LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Quest SV >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System (With Intelligent Key System) >> DTC/Circuit Diagnosis >> DTC B261A: Push-Button Ignition Switch >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Press push-button ignition switch for 1 second under the following condition.
      • Selector lever: In the P position
      • Brake pedal: Not depressed
    2. Release push-button ignition switch and wait 1 second.
    3. Check DTC in "Self diagnostic result" mode of "BCM" using CONSULT.

    Is DTC detected? 

    YES: Go to "Diagnosis Procedure "

    NO: INSPECTION END

scientia non olet · About LEMON Manuals